Mitsubishi Lancer Reset indicator the Check Engine Light

The Mitsubishi Lancer generates and stores trouble codes related to the vehicle’s emissions control system, malfunctions of sensors on the engine, transmission system or braking system and it lights up (check engine light).

These engine codes will stay stored in the computer until they are removed by a reset procedure. you can scan the system with various models of car check engine testers on the market for scanning and diagnostics of the computer to determine the exact problem.

How to reset the check engine light Mitsubishi Lancer

NOTE. Once you’ve fixed your Mitsubishi Lancer, you must reset the check engine light.

1. Open the hood of your Lancer, and turn the retaining nut on the negative battery cable clamp counterclockwise to loosen it using a socket wrench.
2. Slide the cable clamp off of the negative battery terminal.
3. Wait 10 minutes and reconnect the cable clamp. This will reset the Lancer’s ECU (electronic control unit) and the check engine light.

You can reset the check engine light for Your Mitsubishi Lancer by sliding the cable clamp off from the negative battery terminal. Now, You just need to wait at least 10 minutes before reconnecting the cable clamp again.

Following these instructions should reset the Lancers check engine light and the electronic control unit as well. The check engine light is extremely important and should be taken seriously when it is turned on because it can be due to a mIS Firing engine which is the result of a overheated catalytic converter.

It can also turn on for minor issues such as a faulty gas cap as well. But You shouldnt dismiss these warnings to ensure the safety of You and Your vehicle.

Mitsubishi Lancer reset the check engine light

Do not drive your car if you have not fixed the problem. Go to the nearest authorized Mitsubishi Lancer car service for troubleshooting and for your safety.